How to Program the Quad-Copter

Written By: Drew Bentz
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

2

Time Required

00:15:00

Sections

1

Flags

0

  1. Insert the USB Cable into the USB port on the Processor. Flip the power switch on the board to the position closest to the USB Port. Flip the power switch on the board to the position closest to the USB Port.

    • Insert the USB Cable into the USB port on the Processor.

    • Flip the power switch on the board to the position closest to the USB Port.

  2. Start TI Code Composer Studio and open the QRotor project. Make any necessary changes in the code.

    • Start TI Code Composer Studio and open the QRotor project.

    • Make any necessary changes in the code.

    • Press the "Debug" button.

    • Wait for the code to finish uploading, then press the "Stop Debugging" button.

    • Disconnect the USB cable and flip the switch the other way.

Finish Line

Author

Drew Bentz

Member since: 02/23/2013

1 Reputation

10 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 109